Waeco CoolFun CD-30 Spezifikationen PDF herunterladen (Seite 27)

Designed for small refrigerator capacities (up to approx. 130 litres) and for use in cool waters

| Equipped with the power-regulated Danfoss BD35F compressor

| Two air-cooled units of different body shapes

| Three evaporator types and one cold accumulator,

each designed to precisely match the compressor performance

| Corrosion-resistant stainless steel mounting plate

| Impeccable operation in inclined position

Designed for small and medium refrigerator capacities (up to approx. 250 litres) and for use in warmer waters

| Equipped with the power-regulated Danfoss BD35F compressor

| Three air-cooled units of different body shapes and one water-cooled unit

| Seven evaporator types and one cold accumulator with automatic programme controller,

each designed to precisely match the compressor performance

| Corrosion-resistant stainless steel mounting plate

| Impeccable operation in inclined position

Designed for extra-large refrigerator capacities (up to approx. 400 litres), for deep-freeze cooling

(up to approx. 200 litres) and for use in tropical waters

| Equipped with the power-regulated Danfoss BD50F compressor (25% more cooling power)

| Three air-cooled units of different body shapes and one water-cooled unit

| Three evaporator types and one cold accumulator with automatic programme controller,

each designed to precisely match the compressor performance

| Corrosion-resistant stainless steel mounting plate

| Impeccable operation in inclined positions

| With AEO electronics (Adaptive Energy Optimiser), see page 75

Every refrigeration system comprises a compressor, a condenser

and an evaporator. To ensure efﬁcient operation the three key

components must be perfectly coordinated. The WAECO

range includes a variety of condensers and evaporators for

optimal conﬁguration.

WAECO exclusively uses the adaptive speed Danfoss

compressors BD35F and BD50F. These compressors contribute

signiﬁcantly to the supreme efﬁciency of WAECO refrigeration

systems – along with the following factors:

| The compressor speed adapts precisely to the performance

requirements of the other system components (evaporator

and condenser).

| Both compressor types can be supplied with plate and ﬁn

evaporators in a range of shapes and sizes. This ensures

that every shape of container can be equipped correctly. It also

makes optimum use of the compressor performance.

| The dynamically ventilated or water-cooled condenser units

always guarantee the required heat diffusion.

Condenser:

With air or water cooling?

Air-cooled units are easier to install than water-cooled

units. And they are just as efﬁcient in most cases,

because the air temperature at the ship’s hull below

the water line is barely higher than the water

temperature. Water cooling is recommended in cases

where the cooling unit is installed in the engine room or

if the yacht will mostly be sailing in tropical waters.

The ideal mounting location:

Where is the air coolest on a ship?

Clear answer: the best location is below the water line,

because here, the air is already cooled by the water

temperature. WAECO offers cooling units in various

designs, so that even the most awkwardly shaped

space can be used. During installation, it is necessary

to ensure that the unit has adequate air circulation.

This can be achieved by simple slots or holes, or by

means of the air exhaust hood available as accessory.

Evaporator:

Plate or ﬁn type?

The larger the surface of an evaporator, the more heat it

can absorb, and the greater its capacity. For small

refrigerator volumes low-cost plate evaporators are

ideal. Fin-type evaporators have up to ﬁve times more

surface area than plate evaporators of the same size. If

the air exchange is increased by fans (circulating air

evaporators) excellent refrigeration and deep-freeze

capability can even be achieved in tropical temperatures.

www.dometic-waeco.com

Entry-level units at a super price

Professional units for highest demands

Choosing the right cooling unit and mounting location

Compressors with adaptive speed control

Product information

Cooling units

ColdMachine Serie 50

ColdMachine Serie 80

ColdMachine Serie 90

ColdMachine 55

ColdMachine 84

ColdMachine 96

Cooling units

For entry-level and professional use

Tailor-made cooling solutions for all applications

Where standard units don’t ﬁt, tailor-made fridge space must be provided – an easy task with

WAECO ColdMachine cooling units. Supplied with pre-charged refrigerant and self-sealing valve couplings,

they are ﬁne for do-it-yourself installation. Three different series are available to cater for all applications.

WAECO ColdMachine cooling units work with power-regulated Danfoss BDF compressors. They are

powerful, economical and superbly quiet in operation, tilt-insensitive and ready for connection to

12/24 volts DC. Each series comes with complementary evaporators speciﬁcally designed to match the

performance of the compressor ﬁtted.

Pages 68 – 69

Professional units for individual cooling comfort Pages 70 – 73

Pages 74 – 77

66 – 67

Ideal for

DIY ﬁtting!

Contents, speciﬁcations and availability are subject to change serving the technical improvement.Contents, speciﬁcations and availability are subject to change serving the technical improvement.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 33 34

Kommentare zu diesen Handbüchern

Keine Kommentare

Waeco CoolFun CD-30 Spezifikationen Seite 27

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Waeco CoolFun CD-30